Polysulfone (PSF) membrane filters are employed as thermoplastic material in fabricating membranes for use in water ultrafiltration systems and gas separation. However, PSF membrane filters have seldom been used in aerosol filtration.
What is the difference between polyethersulfone and polysulfone?
The term "polysulfone" is normally used for polyarylethersulfones (PAES), since only aromatic polysulfones are used commercially. Furthermore, since ether groups are always present in these polysulfones, PAESs are also referred to as polyether sulfones (PES), poly(arylene sulfone)s or simply polysulfone (PSU).
What is polysulfone used for?
Polysulfone allows easy manufacturing of membranes, with reproducible properties and controllable size of pores down to 40 nanometers. Such membranes can be used in applications like hemodialysis, waste water recovery, food and beverage processing, and gas separation.
Which membrane is used for ultrafiltration?
Most UF membranes use polymer materials (polysulfone, polypropylene, cellulose acetate, polylactic acid) however ceramic membranes are used for high temperature applications.
What is the pore size of UF membrane?
0.02 – 0.05 microns
Ultrafiltration membranes have pore sizes in the range of 0.02 – 0.05 microns, which contributes to the production of high-quality water; the pore-size range means that the purification process is characterized by a high removal capability of bacteria, viruses, colloids, and silt.
What factors affect ultrafiltration?
The performance of an ultrafilter is dependent on the properties of the membrane (pore size, porosity), interaction between the membrane and the solute being ultrafiltered, and the concentration of solute at the membrane surface. The influence of each of these factors is reviewed.
What is the ultrafiltration process?
Ultrafiltration (UF) is a water purification process in which water is forced through a semipermeable membrane. Suspended solids and high-molecular-weight solutes remain on one side of the membrane, the retentate side, while water and low-molecular-weight solutes filter through the membrane to the permeate side.
Where is ultrafiltration used?
Ultrafiltration is an effective means of reducing the silt density index of water and removing particulates that can foul reverse osmosis membranes. Ultrafiltration is frequently used to pretreat surface water, seawater and biologically treated municipal water upstream of the reverse osmosis unit.
What is the difference between ultrafiltration and filtration?
Ultrafiltration is a form of filtration that uses membranes to separate different fluids or ions. Ultrafiltration is not as fine a filtration process as Nanofiltration, but it also does not require the same energy to perform the separation.
Which is better UF or NF?
NF showed better results than UF due to the smaller pore sizes of the filtration system. However, this enhancement was observed mainly for 8 compounds originating from the classes of PhCs and PFCs, while the removal of EDCs was not statistically significant.
Consult Your Maxie Hollow Fiber Membrane Experts
Whatever your water and specialty-separation challenges, we’re ready to provide our perspective, expertise, and solutions, so you can move forward.
We help you avoid the pitfalls to deliver the quality and value your hollow fiber membrane need, on-time and on-budget.
